What Happens If Your Battery Keeps Cutting Off?

If you find that your battery keeps cutting off while you’re using your vaping device, you would need to check a few things before you change the battery or throw out your personal vaporizer or electronic cigarette altogether.

So what will prolong the life of a battery on a vaping device so that it won’t cut off?

First of all, you need to keep your batteries clean. DO NOT expose them to an area where dirt can get into them. Also, stay away from liquids and high or low temperatures. Liquid that gets into the connecting part of a battery will mess up the connection. Use a cotton swab or toothpick to clean the battery once a week.

Disconnecting the cartomizer or clearomizer, also known as the atomizer, will greatly help your battery from slowing down due to over-use or drainage. This’ll prolong the life of the battery on your device. Your vaping mechanism should be turned on or used every other day so as to make sure the cells inside remain active and healthy.

Keep your batteries at room temperature which is between 68º F (20º C) and 77º F (25º C). If your battery has not been used for a few days it may go into sleep mode and may even lose the charge. In fact, if the vaping device is carefully stored in a travel case, it’ll greatly help the battery stay out of humid and damp areas so as to prevent the battery from malfunction or breaking, especially if it’s dropped.

Did you know that a battery should run out completely before you charge it again? That way, the lifespan of the battery will be extended. Also, the power-gauge will re-calibrate itself. It has been observed that the battery from many electronic cigarettes can be recharged at least 300 times prior to realizing the end of its cycle.

Sometimes it’s the child lock that has been turned on and that’s what will cut off the battery power. Always check that feature before you use it and make sure it’s turned off. In the case where the child lock was not the issue, check to make sure there was no liquid that got into the clearomizer; clean the device with a Q-tip or Kleenex.

Take a look at the Center Pin. Sometimes it’s the “disconnect”, as the connection has been broken and therefore the battery will fail to operate properly. The clearomizer also has a center-pin that will not enable the device to work properly if the connection has been severed. Prior to cleaning, make sure the battery is completely turned off before you process the center-pin, otherwise there will be a short circuit that will take place. Often, the charger is faulty and not working properly and the charger LED color will turn red within a few seconds.

“Digital Memory” is a condition that decreases the digital memory of a battery. The best way to save a battery’s life and prevent it from drying out, is to charge the battery up to 70% before storing it, especially if it’s for longer periods of time. Also, it’s advisable to discharge a battery completely every 30 charge and discharge cycles.

By following the instructions in this review, your device will always have a battery in tip-top working condition whenever and wherever you feel like relaxing and enjoying the moment.

Leave a Reply

Your email address will not be published. Required fields are marked *